Maintaining the Contact Lenses Module

Adding Suppliers

In order to add products into Optisoft.NET, you will need to add Suppliers first. To add a Supplier through the Contact Lens module, do the following:

• Go to the Contact Lens module.
• Either click the Supplier button onscreen, or go to the Maintenance tab and click Suppliers.
• Enter the name, address and contact details of the Supplier.
• From the Type list, double click on each Product Type that your Supplier provides. This will add the Types to the Selected list.
• Click Save or use the auto save feature.

Status

Status's allow you to track your Dispenses through to their collection. There are a few fixed Status's that must be retained, however, you can create your own custom status's in the following way:

• Go to the Contact Lens module.
• Click on the Maintenance tab.
• Click the Status button.
• Enter a Status Name.
• Choose a colour.
• Select a validation option.
• If you would like to send a notification when dispenses are updated to your new status, then select a notification category from the list.
• Click Save or use the Auto Save feature.
• After you have Saved, you can move your new Status to the correct position, but using the Up and Down buttons on the right hand side.

Back

Home